Admission Open

Add

CCNA Exploration 1: Chapter 4 Exam Answers


CCNA Exploration 1: Chapter 4 Exam Answers

1. What mechanism is used by TCP to provide flow control as segments travel from source to destination?
sequence numbers
session establishment
window size
acknowledgments
2.
CCNAExploration1Chapter4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
Based on the transport layer header shown in the diagram, which of the following statements describe the established session? (Choose two.)
This is a UDP header.
This contains a Telnet request.
This contains a TFTP data transfer.
The return packet from this remote host will have an Acknowledgement Number of 43693.
This is a TCP header.
3. Which information is found in both the TCP and UDP header information?
sequencing
flow control
acknowledgments
source and destination
4. Which transport layer protocol provides low overhead and would be used for applications which do not require reliable data delivery?
TCP
IP
UDP
HTTP
DNS
5. Why are port numbers included in the TCP header of a segment?
to indicate the correct router interface that should be used to forward a segment
to identify which switch ports should receive or forward the segment
to determine which Layer 3 protocol should be used to encapsulate the data
to enable a receiving host to forward the data to the appropriate application
to allow the receiving host to assemble the packet in the proper order
6. Which three features allow TCP to reliably and accurately track the transmission of data from source to destination?
encapsulation
flow control
connectionless services
session establishment
numbering and sequencing
best effort delivery
7. Which is an important characteristic of UDP?
acknowledgement of data delivery
minimal delays in data delivery
high reliability of data delivery
same order data delivery
8. What are two features of the User Datagram Protocol (UDP)? (Choose two.)
flow control
low overhead
connectionless
connection-oriented
sequence and acknowledgements
9.
CCNAExploration1Module4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
 
Refer to the exhibit. The initial TCP exchange of data between two hosts is shown in the exhibit. Assuming an initial sequence number of 0, what sequence number will be included in Acknowledgment 2 if Segment 6 is lost?
2
3
6
1850
3431
3475
10.
CCNA1Chapter4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
 
Refer to the exhibit. Host1 is in the process of setting up a TCP session with Host2. Host1 has sent a SYN message to begin session establishment. What happens next?
Host1 sends a segment with the ACK flag = 0, SYN flag = 0 to Host2.
Host1 sends a segment with the ACK flag = 1, SYN flag = 0 to Host2.
Host1 sends a segment with the ACK flag = 1, SYN flag = 1 to Host2.
Host2 sends a segment with the ACK flag = 0, SYN flag = 1 to Host1.
Host2 sends a segment with the ACK flag = 1, SYN flag = 0 to Host1.
Host2 sends a segment with the ACK flag = 1, SYN flag = 1 to Host1.
11. Why is flow control used for TCP data transfer?
to synchronize equipment speed for sent data
to synchronize and order sequence numbers so data is sent in complete numerical order
to prevent the receiver from being overwhelmed by incoming data
to synchronize window size on the server
to simplify data transfer to multiple hosts
12. Which two options represent Layer 4 addressing? (Choose two.)
identifies the destination network
identifies source and destination hosts
identifies the communicating applications
identifies multiple conversations between the hosts
identifies the devices communicating over the local media
13. With TCP/IP data encapsulation, which range of port numbers identifies all well-known applications?
0 to 255
256 to 1022
0 to 1023
1024 to 2047
49153 to 65535
14. During a TCP communication session, if the packets arrive to the destination out of order, what will happen to the original message?
The packets will not be delivered.
The packets will be retransmitted from the source.
The packets will be delivered and reassembled at the destination.
The packets will be delivered and not reassembled at the destination.
15.
CCNA1ExamAnswers thumb1 CCNA Exploration 1 Chapter 4 Exam Answers
Refer to the exhibit. In line 7 of this Wireshark capture, what TCP operation is being performed?
session establishment
segment retransmit
data transfer
session disconnect
16.
CCNA1Answers thumb1 CCNA Exploration 1 Chapter 4 Exam Answers
Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.)
The local host is using three client sessions.
The local host is using web sessions to a remote server.
The local host is listening for TCP connections using public addresses.
The local host is using well-known port numbers to identify the source ports.
The local host is performing the three-way handshake with 192.168.1.101:1037.
17. Which event occurs during the transport layer three-way handshake?
The two applications exchange data.
TCP initializes the sequence numbers for the sessions.
UDP establishes the maximum number of bytes to be sent.
The server acknowledges the bytes of data received from the client.
18. Which OSI model layer is responsible for regulating the flow of information from source to destination, reliably and accurately?
application
presentation
session
transport
network
19. After a web browser makes a request to a web server that is listening to the standard port, what will be the source port number in the TCP header of the response from the server?
13
53
80
1024
1728
20.
CCNAExplorationNetworkFundamentalsChapter4ExamAnswers thumb CCNA Exploration 1 Chapter 4 Exam Answers
 
Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process, Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will Server 1 take as a result?
create a Layer 1 jam signal
reach a timeout and resend the data that needs to be acknowledged
send a RESET bit to the host
change the window size in the Layer 4 header
21. What is dynamically selected by the source host when forwarding data?
destination logical address
source physical address
default gateway address
source port
 

CCNA Exploration 1: Chapter 3 Exam Answers


CCNA Exploration 1: Chapter 3 Exam Answers

01. What application layer protocol is commonly used to support for file transfers between a client and a server?
  • HTML
  • HTTP
  • FTP
  • Telnet
02. What are two forms of application layer software? (Choose two.)
  • applications
  • dialogs
  • requests
  • services
  • syntax
03. A network administrator is designing a network for a new branch office of twenty-five users. What are the advantages of using a client-server model? (Choose two.)
  • centralized administration
  • does not require specialized software
  • security is easier to enforce
  • lower cost implementation
  • provides a single point of failure
04. What is the purpose of resource records in DNS?
  • temporarily holds resolved entries
  • used by the server to resolve names
  • sent by the client to during a query
  • passes authentication information between the server and client
05. What is the automated service that matches resource names with the required IP address?
  • HTTP
  • SSH
  • FQDN
  • DNS
  • Telnet
  • SMTP
06. What three protocols operate at the Application layer of the OSI model? (Choose three.)
  • ARP
  • DNS
  • PPP
  • SMTP
  • POP
  • ICMP
07. What are three properties of peer-to-peer applications? (Choose three.)
  • acts as both a client and server within the same communication
  • requires centralized account administration
  • hybrid mode includes a centralized directory of files
  • can be used in client-server networks
  • requires a direct physical connection between devices
  • centralized authentication is required
08. Which application layer protocols correctly match a corresponding function? (Choose two.)
  • DNS dynamically allocates IP addresses to hosts
  • HTTP transfers data from a web server to a client
  • POP delivers email from the client to the server email server
  • SMTP supports file sharing
  • Telnet provides a virtual connection for remote access
09. Which email components are used to forward mail between servers? (Choose two.)
  • MDA
  • IMAP
  • MTA
  • POP
  • SMTP
  • MUA
10. As compared to SSH, what is the primary disadvantage of telnet?
  • not widely available
  • does not support encryption
  • consumes more network bandwidth
  • does not support authentication
11. Which statements are correct concerning the role of the MTA in handling email? (Choose three.)
  • routes email to the MDA on other servers
  • receives email from the client’s MUA
  • receives email via the POP3 protocol
  • passes email to the MDA for final delivery
  • uses SMTP to route email between servers
  • delivers email to clients via the POP3 protocol
12. Which two protocols are used to control the transfer of web resources from a web server to a client browser? (Choose two.)
  • ASP
  • FTP
  • HTML
  • HTTP
  • HTTPS
  • IP
13. A small home network has been installed to interconnect three computers together for gaming and file sharing. What two properties represent this network type? (Choose two.)
  • User accounts are centralized.
  • Security is difficult to enforce.
  • Specialized operating system software is required.
  • File permissions are controlled by a single computer.
  • A computer that responds to a file sharing request is functioning as a server.
14. Which layer of the OSI model supplies services that allow user to interface with the network?
  • physical
  • session
  • network
  • presentation
  • application
  • transport
15.ccna1-ch3-15
Refer to the exhibit. What is the destination port for the communication that is represented on line 5?
  • 80
  • 1261
  • 15533
  • 3912
  • 65520
16. What are two characteristics of peer-to-peer networks? (Choose two.)
  • scalable
  • one way data flow
  • decentralized resources
  • centralized user accounts
  • resource sharing without a dedicated server
17. What application layer protocol describes the services that are used for file sharing in Microsoft networks?
  • DHCP
  • DNS
  • SMB
  • SMTP
  • Telnet
18. What are two characteristics of clients in data networks? (Choose two.)
  • use daemons
  • initiate data exchanges
  • are repositories of data
  • may upload data to servers
  • listen for requests from servers
19. What is the role of the OSI application layer?
  • provides segmentation of data
  • provides encryption and conversion of data
  • provides the interface between the applications on either end of the network
  • provides control of all the data flowing between the source and destination devices
20. How does the application layer on a server usually process multiple client request for services?
  • ceases all connections to the service
  • denies multiple connections to a single daemon
  • suspends the current connection to allow the new connection
  • uses support from lower layer functions to distinguish between connections to the service
 

CCNA Exploration 1: Chapter 2 Exam Answers


CCNA Exploration 1: Chapter 2 Exam Answers


01. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)
  • determine pathways for data
  • initiate data communications
  • retime and retransmit data signals
  • originate the flow of data
  • manage data flows
  • final termination point for data flow
02. Select the statements that are correct concerning network protocols. (Choose three.)
  • define the structure of layer specific PDU’s
  • dictate how to accomplish layer functions
  • outline the functions necessary for communications between layers
  • limit the need for hardware compatibility
  • require layer dependent encapsulations
  • eliminate standardization among vendors
03. What are two functions of encapsulation? (Choose two.)
  • tracks delay between end devices
  • enables consistent network paths for communication
  • allows modification of the original data before transmission
  • identifies pieces of data as part of the same communication
  • ensures that data pieces can be directed to the correct receiving end device
04. What is a primary function of the trailer information added by the data link layer encapsulation?
  • supports error detection
  • ensures ordered arrival of data
  • provides delivery to correct destination
  • identifies the devices on the local network
  • assists intermediary devices with processing and path selection
05. Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)
  • Network
  • Transport
  • Physical
  • Data Link
  • Session
06. What is a PDU?
  • corruption of a frame during transmission
  • data reassembled at the destination
  • retransmitted packets due to lost communication
  • a layer specific encapsulation
07. Which characteristic correctly refers to end devices in a network?
  • manage data flows
  • originate data flow
  • retime and retransmit data signals
  • determine pathways for data
08.
Refer to the exhibit. “Cell A” at IP address 10.0.0.34 has established an IP session with “IP Phone 1″ at IP address 172.16.1.103. Based upon the graphic, which device type best describes the function of wireless device “Cell A?”
  • the destination device
  • an end device
  • an intermediate device
  • a media device
09.
Refer to the exhibit. Which three labels correctly identify the network types for the network segments that are shown? (Choose three.)
  • Network A — WAN
  • Network B — WAN
  • Network C — LAN
  • Network B — MAN
  • Network C — WAN
  • Network A – LAN
10. Which three statements best describe a Local Area Network (LAN)? (Choose three.)
  • A LAN is usually in a single geographical area.
  • The network is administered by a single organization.
  • The connection between segments in the LAN is usually through a leased connection.
  • The security and access control of the network are controlled by a service provider.
  • A LAN provides network services and access to applications for users within a common organization.
  • Each end of the network is generally connected to a Telecommunication Service Provider (TSP).
11.
Refer to the exhibit. Which networking term describes the data interleaving process represented in the graphic?
  • piping
  • PDU
  • streaming
  • multiplexing
  • encapsulation
12. What is the primary purpose of Layer 4 port assignment?
  • to identify devices on the local media
  • to identify the hops between source and destination
  • to identify to the intermediary devices the best path through the network
  • to identify the source and destination end devices that are communicating
  • to identify the processes or services that are communicating within the end devices
13. What device is considered an intermediary device?
  • file server
  • IP phone
  • laptop
  • printer
  • switch
14.
Refer to the exhibit. Which term correctly identifies the device type that is included in the area B?
  • source
  • end
  • transfer
  • intermediary
15.
Refer to the exhibit. What type of network is shown?
  • WAN
  • MAN
  • LAN
  • WLAN
16. Which layer encapsulates the segment into packets?
  • physical
  • data link
  • network
  • transport
17. What can be identified by examining the network layer header?
  • the destination device on the local media
  • the destination host address
  • the bits that will be transferred over the media
  • the source application or process creating the data
18.
Refer to the exhibit. Which set of devices contains only end devices?
  • A, C, D
  • B, E, G, H
  • C, D, G, H, I, J
  • D, E, F, H, I, J
  • E, F, H, I, J
19. During the encapsulation process, what occurs at the data link layer?
  • No address is added.
  • The logical address is added.
  • The physical address is added.
  • The process port number is added.
20. What is the purpose of the TCP/IP Network Access layer?
  • path determination and packet switching
  • data presentation
  • reliability, flow control, and error detection
  • network media control
  • the division of segments into packets
21. What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?
  • physical, network, application, data link, presentation, session, transport
  • application, physical, session, transport, network, data link, presentation
  • application, presentation, physical, session, data link, transport, network
  • application, presentation, session, transport, network, data link, physical
  • presentation, data link, session, transport, network, physical, application
 

ShareThis

Facebook Badge

 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. online exams ans - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger